


Piercing ring, High Quality Front Facing Hinged Rings with CZ/Black
Tax included. Shipping calculated at checkout





Pickup available at Koruliike Romeo & Julia
Usually ready in 24 hours

Piercing ring, High Quality Front Facing Hinged Rings with CZ/Black
10mm
Koruliike Romeo & Julia
Isokatu 39
90100 Oulu
Finland

Product description
Piercing ring, High Quality Front Facing Hinged Rings with CZ/Black
This stunning black piercing ring has diamonds set into the front edge of the ring, making them look beautiful, especially in septum and daith piercings. The jewelry can also be used for other ear piercings. The ring has an easy hinged fastening.
The piercing ring is made of high-quality 316L surgical steel and has the best coating on the market. The coating is made by coating the jewelry with PVD. This creates a coating that lasts significantly longer than other coatings. The method has been used in medical procedures since the 80s.
The jewelry is available in two sizes.
Size and material details:
- Size: piercing thickness 1.2mm, diameter 8mm or 10mm
- Material: 316L surgical steel / Cubic Zirconia | PVD coating
- Color: black / clear
- Fastening: clicker or hinge mechanism
Instructions for use:
- Avoid getting cosmetics on your jewelry, as they will accumulate on the surface of the jewelry and tarnish it over time. If you wear jewelry with an ear piercing, it is recommended to remove it before dyeing your hair.
- Store in its own box or jewelry pouch when not wearing.
- The jewelry has a clicker - a hinged closure where the jewelry opens by lifting and snaps shut. It is worth guiding the opening part with your fingers or pliers to the right place, especially if you are using a larger diameter, this way the ring can be easily attached.
- If necessary, you can adjust the ring's fastening mechanism. If you gently squeeze the ring "tight" while the lock is open, you can adjust the fastening tighter. If you open the ring more, the lock will become looser. It is worth making adjustments very carefully so that you do not adjust the ring too much, even a small squeeze/unlock has a big effect on the ring's mechanism♥.
- If necessary, the jewelry can be cleaned with, for example, dishwashing liquid and a soft toothbrush. Put a drop of detergent on the jewelry, brush gently with a toothbrush and rinse. Washing removes cosmetic residues from the jewelry and it looks wonderfully shiny again!
Hoito-ohje
Tuotetiedot
Piercing ring, High Quality Front Facing Hinged Rings with CZ/Black
This stunning black piercing ring has diamonds set into the front edge of the ring, making them look beautiful, especially in septum and daith piercings. The jewelry can also be used for other ear piercings. The ring has an easy hinged fastening.
The piercing ring is made of high-quality 316L surgical steel and has the best coating on the market. The coating is made by coating the jewelry with PVD. This creates a coating that lasts significantly longer than other coatings. The method has been used in medical procedures since the 80s.
The jewelry is available in two sizes.
Size and material details:
- Size: piercing thickness 1.2mm, diameter 8mm or 10mm
- Material: 316L surgical steel / Cubic Zirconia | PVD coating
- Color: black / clear
- Fastening: clicker or hinge mechanism
Instructions for use:
- Avoid getting cosmetics on your jewelry, as they will accumulate on the surface of the jewelry and tarnish it over time. If you wear jewelry with an ear piercing, it is recommended to remove it before dyeing your hair.
- Store in its own box or jewelry pouch when not wearing.
- The jewelry has a clicker - a hinged closure where the jewelry opens by lifting and snaps shut. It is worth guiding the opening part with your fingers or pliers to the right place, especially if you are using a larger diameter, this way the ring can be easily attached.
- If necessary, you can adjust the ring's fastening mechanism. If you gently squeeze the ring "tight" while the lock is open, you can adjust the fastening tighter. If you open the ring more, the lock will become looser. It is worth making adjustments very carefully so that you do not adjust the ring too much, even a small squeeze/unlock has a big effect on the ring's mechanism♥.
- If necessary, the jewelry can be cleaned with, for example, dishwashing liquid and a soft toothbrush. Put a drop of detergent on the jewelry, brush gently with a toothbrush and rinse. Washing removes cosmetic residues from the jewelry and it looks wonderfully shiny again!