


Titanium cartilage jewelry/tragus jewelry, Round Diamond Cut Top in Gold
Tax included. Shipping calculated at checkout
Pickup currently unavailable at Koruliike Romeo & Julia

Titanium cartilage jewelry/tragus jewelry, Round Diamond Cut Top in Gold
Koruliike Romeo & Julia
Isokatu 39
90100 Oulu
Finland

Product description
Titanium cartilage jewelry/tragus jewelry, Round Diamond Cut Top in Gold
This labret, finished with beautiful diamond-cut decorations, is made of G23 titanium and is suitable for many ear piercings, such as helix or cartilage piercings and tragus piercings. The jewelry also works well in lower ear holes, the jewelry pin is the same strength as in traditional ear jewelry.
The jewelry is Internally Threaded, meaning the bottom is hollow and there is a protrusion in the jewelry part where the thread is located.
This high-quality piercing is made of G23 titanium, which is a good choice for those with allergies and sensitivities.
The gold color is made by coating the jewelry with the PVD method (Physical Vapor Deposition). This gives the jewelry a durable gold surface. The method has been used in medical procedures since the 1980s. The jewelry coating is also autoclavable.
Size and material details:
- Size: pin thickness 1.2mm / length 6mm
- Size: decoration 4mm
- Color: gold
- Material: titanium Ti6AL 4V Eli degree 23 – ASTM (F-136) | PVD coating
- Mounting: Internally Threaded
Instructions for use:
- Avoid getting cosmetics on your jewelry, as it will tarnish the jewelry over time.
- Remove jewelry during hair coloring.
- Store in its own box or jewelry pouch when not wearing.
- Do not overtighten internally threaded jewelry or the jewelry's thread may be damaged. Once the jewelry is fully screwed in, a little extra tightening is sufficient. Remember to tighten your jewelry regularly.
- If necessary, the decorative part can be cleaned with, for example, dishwashing liquid and a soft toothbrush. Put a drop of detergent on the jewelry, brush gently with a toothbrush and rinse. Washing removes cosmetic residues from the jewelry and it looks wonderfully shiny again!
Care instructions
Product information
Tärkeää ennen tilausta
Tärkeää tietoa lävistyskoruista
Lävistyskorut toimitetaan sinetöityinä
Kaikki lävistyskorumme toimitetaan terveydellisistä ja hygieniasyistä sinetöidyssä pakkauksessa.
Tarkista ennen sinetin avaamista, että pakkauksessa on tilaamasi korumalli, väri ja koko. Avaamattomassa ja vahingoittumattomassa sinetöidyssä pakkauksessa olevalla lävistyskorulla on normaali palautusoikeus.
Kun sinetti tai sinetöity pakkaus on avattu, tuotetta ei voida enää palauttaa terveydellisistä ja hygieniasyistä.
Jos pakkauksessa on väärä tuote tai huomaat tuotteessa vaurion ennen pakkauksen avaamista, ota yhteyttä asiakaspalveluumme:
Tarkista koru ennen käyttöönottoa
Tarkista ennen korun asettamista, että:
- koru ja sen osat ovat ehjiä
- kierteet ja kiinnitykset toimivat normaalisti
- irrotettavat osat kiinnittyvät napakasti
- clicker- eli saranalukko sulkeutuu ja pysyy kiinni
- korussa ei ole teräviä reunoja tai näkyviä vaurioita.
Huomaathan, että eri kiinnitysmekanismeihin liittyy ominaisuuksia, jotka eivät ole valmistusvirheitä. Esimerkiksi push-in-koristeosan tapissa oleva pieni mutka kuuluu kiinnitysmekanismiin, ja clicker-korun lukituksen napakkuutta voidaan tarvittaessa hienosäätää varovasti.
Älä ota korua käyttöön, jos sen kiinnitys ei toimi normaalisti, osa jää löysäksi tai korussa näkyy vaurioita. Tutustu ennen käyttöönottoa erilliseen lävistyskorujen hoito- ja käyttöohjeeseen, jossa kerrotaan tarkemmin kierteellisten, push-in- ja clicker-korujen kiinnittämisestä, säätämisestä ja tarkistamisesta.
Titanium cartilage jewelry/tragus jewelry, Round Diamond Cut Top in Gold
This labret, finished with beautiful diamond-cut decorations, is made of G23 titanium and is suitable for many ear piercings, such as helix or cartilage piercings and tragus piercings. The jewelry also works well in lower ear holes, the jewelry pin is the same strength as in traditional ear jewelry.
The jewelry is Internally Threaded, meaning the bottom is hollow and there is a protrusion in the jewelry part where the thread is located.
This high-quality piercing is made of G23 titanium, which is a good choice for those with allergies and sensitivities.
The gold color is made by coating the jewelry with the PVD method (Physical Vapor Deposition). This gives the jewelry a durable gold surface. The method has been used in medical procedures since the 1980s. The jewelry coating is also autoclavable.
Size and material details:
- Size: pin thickness 1.2mm / length 6mm
- Size: decoration 4mm
- Color: gold
- Material: titanium Ti6AL 4V Eli degree 23 – ASTM (F-136) | PVD coating
- Mounting: Internally Threaded
Instructions for use:
- Avoid getting cosmetics on your jewelry, as it will tarnish the jewelry over time.
- Remove jewelry during hair coloring.
- Store in its own box or jewelry pouch when not wearing.
- Do not overtighten internally threaded jewelry or the jewelry's thread may be damaged. Once the jewelry is fully screwed in, a little extra tightening is sufficient. Remember to tighten your jewelry regularly.
- If necessary, the decorative part can be cleaned with, for example, dishwashing liquid and a soft toothbrush. Put a drop of detergent on the jewelry, brush gently with a toothbrush and rinse. Washing removes cosmetic residues from the jewelry and it looks wonderfully shiny again!
Tärkeää tietoa lävistyskoruista
Lävistyskorut toimitetaan sinetöityinä
Kaikki lävistyskorumme toimitetaan terveydellisistä ja hygieniasyistä sinetöidyssä pakkauksessa.
Tarkista ennen sinetin avaamista, että pakkauksessa on tilaamasi korumalli, väri ja koko. Avaamattomassa ja vahingoittumattomassa sinetöidyssä pakkauksessa olevalla lävistyskorulla on normaali palautusoikeus.
Kun sinetti tai sinetöity pakkaus on avattu, tuotetta ei voida enää palauttaa terveydellisistä ja hygieniasyistä.
Jos pakkauksessa on väärä tuote tai huomaat tuotteessa vaurion ennen pakkauksen avaamista, ota yhteyttä asiakaspalveluumme:
Tarkista koru ennen käyttöönottoa
Tarkista ennen korun asettamista, että:
- koru ja sen osat ovat ehjiä
- kierteet ja kiinnitykset toimivat normaalisti
- irrotettavat osat kiinnittyvät napakasti
- clicker- eli saranalukko sulkeutuu ja pysyy kiinni
- korussa ei ole teräviä reunoja tai näkyviä vaurioita.
Huomaathan, että eri kiinnitysmekanismeihin liittyy ominaisuuksia, jotka eivät ole valmistusvirheitä. Esimerkiksi push-in-koristeosan tapissa oleva pieni mutka kuuluu kiinnitysmekanismiin, ja clicker-korun lukituksen napakkuutta voidaan tarvittaessa hienosäätää varovasti.
Älä ota korua käyttöön, jos sen kiinnitys ei toimi normaalisti, osa jää löysäksi tai korussa näkyy vaurioita. Tutustu ennen käyttöönottoa erilliseen lävistyskorujen hoito- ja käyttöohjeeseen, jossa kerrotaan tarkemmin kierteellisten, push-in- ja clicker-korujen kiinnittämisestä, säätämisestä ja tarkistamisesta.










